1、个人简介 李云龙，博士，副教授，博导。2023年4月毕业于西北工业大学，师从林鑫教授。主要从事高性能金属(难熔合金、重稀土镁合金、高温合金)增材制造、合金化设计、宏微观组织控制、强韧化机理分析以及高温氧化防护等方面的研究工作。主持国家自然科学基金(青年基金)、中国博士后科学基金面上资助，山西省自然基金青年基金等项目。在国际顶级期刊Composites Part B: Engineering， Scripta Materialia、Corrosion Science， Journal of Materials Science & Technology等发表论文40余篇。任中国机械工程学会增材制造技术分会第三届委员会委员；中国先进材料与智能制造战略专委会委员；《Rare Metals》，《Tungsten》，《稀有金属材料与工程》中英文版，《材料工程》，《航空材料学报》等期刊青年编委。 2、教育和工作经历 2011.09 -2015.06 佳木斯大学 工学学士 2015.09 - 2018.03 西北工业大学 工学硕士 2021.02–2021.10 National University of Singapore 联合培养 2018.03–2023.04 西北工业大学 工学博士 2023.04-2023.07 中国科学院西安光学精密机械研究所 助理研究员 2023.10-2025.11 中北大学 博士后 2023.10-至今 中北大学 副教授 3、研究方向 金属增材制造、合金设计、宏微观组织控制、强韧化机理分析、高温氧化防护 4、科研项目 主持: 国家自然科学基金(青年基金)、中国博士后科学基金面上资助、山西省自然基金青年基金、再制造技术国家级重点实验室开放课题、金属凝固控制与精确成形山西省重点实验室开放基金、中北大学高层次人才科研启动项目等；作为核心骨干参与：JKW基础加强计划项目，KGJ重大项目等。 5、学术成果 1) Y. L. Li, X. Lin, Y. L. Hu, W. Fan, X.H. Gao, J. Yu, H.B Dong,W.D Huang. Microstructure and fracture toughness of a Nb–Ti–Si-based in-situ composite fabricated by laser-based directed energy deposition, COMPOS PART B-ENG, 2024,278,111427 2)Y. L. Li, X. Lin, Y. L. Hu, H.B. Dong, Q. Ma, W.D. Huang, Microstructure and isothermal oxidation behavior of Nb-Ti-Si-based alloy additively manufactured by powder-feeding laser directed energy deposition, CORROS SCI. 2020, 173:108757. 3)Y. L. Li, X. Lin, Y. L. Hu, H.B. Dong, Q. Ma, W.D. Huang, Synergistic effect of Mo and Zr additions on microstructure and mechanical properties of Nb-Ti-Si-based alloys additively manufactured by laser directed energy deposition，J MATER SCI TECHNOL，2022,103:84-97. 4)Y. L. Li, X. Lin, Y. L. Hu, W.T.Yan, Jerry Ying Hsi Fuh, H.B. Dong, W.D. Huang, Precipitation behavior of Nb-Si-based in-situ composite manufactured by laser directed energy deposition, SCRIPTA MATER, 2022,207:114288. 5)Y. L. Li, X. Lin, Y. L. Hu, H.B. Dong, Q. Ma, W.D. Huang，The effect of Mo on microstructure and mechanical properties of Nb-22Ti-16Si alloy additively manufactured via laser directed energy deposition，J Alloy Compd. 2020, 858:158143. 6) Y. L. Li, X. Lin, Y. L. Hu, N. Kang, H.B. Dong, W.D. Huang, Zirconium modified Nb-22Ti-16Si alloys fabricated by laser additive manufacturing: microstructure and fracture toughness, J Alloy Compd. 2019,783:66-76. 7)Y. L. Li, X. Lin, Y. L. Hu, X.H. Gao, J. Yu, H.B Dong. Alloying on the high-temperature oxidation behavior of Nb-Ti-Si-based alloy additively manufactured by laser directed energy deposition. INT J REFRACT MET H, 2024,121,106682 8)Y. L. Li, X. Lin, Z.Y. Zhao, W.T. Yan, J. Yu, P.K. Bai, Investigation on the composite effect of Zr and Cr on oxidation behavior and fracture toughness of Nb-Ti-Si-based alloys manufactured by directed energy deposition, MATER CHARACT. 2024，214，114078. 9）C. Zhang, R.F. Ju, Y.L. Li*, Z.Y. Zhao, L.Q. Wang, K. Ma, D.D. Zhang, Z. Zhang, P.K. Bai, Wire-arc additive manufacturing of Mg-Gd-Y-Zn-Zr alloy: Microstructure and mechanical properties, Journal of Materials Research and Technology.2024,32 3083-3092. 10）G.H. Li, Y.L. Li*, Z.Y. Zhao, S.Z.Wei, L.Q. Wang, K. Ma, D.D. Zhang, Z. Zhang, X. Lin, P.K. Bai, Investigation of microstructure and mechanical properties of GWZ1031K alloy additively manufactured by cold metal transfer-based wire-arc directed energy deposition, Journal of Alloys and Compounds. 2025, 1021,179652 11) R. Ju, Y.L. Li*, Z. Zhao, L. Wang, K. Ma, D. Zhang, S. Wei, Z. Zhang, W. Fan, X. Lin, P. Bai, Effect of Wire Feed Rate on Microstructure and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy Fabricated via Cold Metal Transfer Wire-Arc Additive Manufacturing(CMT-WAAM), Journal of Alloys and Compounds,2025,1029,180812 12) C. Jia, Z. Zhao, Y.L. Li*， W. Du, Z. Zhao, Y. Hu, W. Fan, J. Wang, X. Lin, H. Dong, P. Bai, Enhanced microstructural control and mechanical performance of selective laser melted 2Cr13 martensitic stainless steel: The role of post-process heat treatment, Journal of Materials Research and Technology 39 (2025) 7953-7966. 13) Z. Zhao, C. Jia, Y.L. Li*， X. Gao, Z. Zhao, J. Wang, W. Fan, P. Bai, Microstructure and mechanical properties of additively manufactured GH4099 superalloy, Materials Science in Additive Manufacturing, 4(4) (2025). 6、学术兼职 中国机械工程学会增材制造技术分会第三届委员会委员； 中国先进材料与智能制造战略专委会委员 中国发展战略学研究会会员 中国机械工程学会高级会员； 《Rare Metals》，《Tungsten》，《稀有金属材料与工程》中英文版，《材料工程》，《航空材料学报》等期刊青年编委； Journal of Materials Science & Technology、Virtual and Physical Prototyping，Journal of alloy and compound，International Journal of Refractory Metals and Hard Materials，Materials Characterization等期刊审稿人。 7、个人荣誉 2023.12 山西省优秀博士后（第一届山西省博士后创新大赛） 2023.12 第一届山西省博士后创新大赛三等奖(排名第三) |
